Verilog empty port

When using the non-ANSI style, it is legal to have empty ports in the port list. An empty port will be translated to an anonymous port that nullifies anything connected to it. Such empty ports are usually the result of superfluous commas and rarely reflect the intended design. Empty ports are marked as warnings by Sigasi (rule 142).

VERILOG
module discouraged_code(
    a,
    ,
    b
);
    input a;
    output b;
endmodule

Rule configuration

This rule can be disabled for your project, or its severity and parameters can be modified in the project linting settings. Alternatively, it can be manually configured using one of the following templates, depending on the type of project you use.

For Modular Projects, add these entries to your project's .sigasi/settings.json settings file. To scope the settings to a specific folder or file instead of the whole project, place them inside an @override block; to scope them to a specific target, place them inside a @targets block.
JSONC
```
{
    "verilog.rules.142.severity": "{ERROR|WARNING|INFO|IGNORE}"
}
```
For Classic Projects, add the VHDL lines to .settings/com.sigasi.hdt.vhdl.linting.prefs and the Verilog/SystemVerilog lines to .settings/com.sigasi.hdt.verilog.linting.prefs:
PREFS
```
142/severity/${path}={error|warning|info|ignore}
```